
TREND C075X8MMTC ROUND/OVER 4.8MM RAD X 12.7MM CUT
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece
D=22.0 mm
C=1/2 inch
C=12.7 mm
B=9.5 mm
B2=12.7 mm
R=3/16 inch
R=4.8 mm
Overall length=64.5 mm
Shank Diameter=8 mm