C074BX1/4TC - ROUNDING OVER 3.0MM RADIUS X 9.5MM CUT
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece
D 18.7mm
C 3/8 inch
C 9.5 mm
B 9.5 mm
B 212.7 mm
R 3.0 mm
OL 61 mm
Shank Diameter 1/4 inch
